Lora 433MHz LILYGO® TTGO Meshtastic T-Beam V1.2 ESP32 LoRa Development Board 433MHz WiFi BLE GPS OLED Display AXP2101
The LoRa Meshtastic T-BEAM device are small battery powered devices that will mesh with other T-BEAM and send messages and other data from your phones, tablets and computers.
Let's MESH-UP Hams Canada!...
* Please Note: NO MORE SOLDERING! the screen is already installed
* Please Note: Please refer to online help and support groups how to setup your Lora Mesh softare.
In Canada we use 433mhz band for Lora Mesh text messaging network.
|
Meshtastic T-Beam |
|
|
MCU |
ESP32 |
|
Flash |
4MB |
|
Serial Chip |
CH9102 |
|
PMU |
AXP2101 |
|
Wireless Protocol |
Wi-Fi+Bluetooth 4.2 |
|
Onboard Functions |
3 Button(Power+IO38+Reset) |
|
Power Supply Mode |
Support USB / 18650 Battery |
|
NEO-6M GPS Modules |
Support GPS Protocol |
|
Onboard RTC Crystal |
|
|
Support Interrupt / Wakeup |
|
|
Long Range Low Power LoRa Transceiver |
|
|
High Sensitivity |
-148 dBm |
|
Transceive Rate |
300 kbps |
|
Optional Version |
SX1278 / SX1276 |
|
Power Amplifiers |
+14dBm |
|
TX Current |
120mA |
|
RX Current |
9.9mA |
|
Programmable Bit |
300 kbps |
|
Oscillator |
TCXO |
|
Frequency model comparison |
||
|
Hardware |
SX1278 |
SX1276 |
|
Software |
Meshtastic 433MHz Version |
Meshtastic 868/915/923 MHz Version |
|
0.96 Inch OLED Parameters |
|||
|
Size |
0.96 inch |
High resolution |
128 * 64 |
|
Driver IC |
SSD1306 |
Color |
White |
