The All New Xiegu X6100 is an Ultra-Portable HF Transceiver

The new X6100 utilizes a proven SDR software defined radio platform with impressive performance. A powerful baseband and RF unit with rich and diversified operating functions brings you a brand-new experience in Amateur Radio. With its compact structure and tiny appearance, you can immediately set forth on you next Ham Radio Adventure. Get close to nature and enjoy the fun of outdoor communications.

****PLEASE NOTE: Any firmware bugs or any other software related issues are not under warranty, manufacture releases updates to improve performance and functionality of the hardware.

General Specifications:

HF/50MHz full mode (supporting data communication)
Transmitting power: External power supply: 10W, battery: 5W
4" high-resolution color screen, 800*480
Built-in large capacity lithium battery pack (3500mAh, 12V)
Built-in efficient automatic antenna tuner
Integrated standing wave scanner, voice pager
Integrated modem, preset message, CW automatic call
Native Bluetooth/wifi function, can realize wireless audio/keyboard & mouse operation.
Integrated USB line control/transmission, supports USB HOST.
Standard high stability TCXO internal clock source

Receive Frequencies:

• 0.5MHz - 30MHz
• 50MHz - 54MHz

Transmit Frequencies:

• 1.8 - 2.0MHz
• 3.5 - 4.0MHz
• 5.3515 - 5.3665MHz
• 7.0 - 7.3MHz
• 10.1 - 10.15MHz
• 14.0 - 14.35MHz
• 18.068 - 18.168MHz
• 21.0 - 21.45MHz
• 24.89 - 24.99MHz
• 28.0 - 29.7MHz
• 50.00 - 53.99MHz

Operation Mode:

• USB/LSB (J3E), CW (A1A), FM (F3E), RTTY(F1B), AM (A3E)
• Minimum Frequency Step: 10Hz
• Frequency Stability: ±1.5ppm
• External Power Supply Voltage: DC 9.0V~15.0V, negative ground
• Frequency Stability: ±1ppm (20 minutes after start)
• Antenna Port Impedance: 50Ω
• Antenna Interface Type: BNC
• Working Temperature: 0?~+55?
• Transmission power: External power supply: 10W | Battery power supply: 5W
• Current Consumption: Standby: 330mA (Max) | Transmit: 3A (Max)
• Overall Dimensions: About 180*86*49mm

Transmitter:

Transmitting Power:

• 10W (SSB/CW/FM) @13.8VDC | 5W @battery
• 2.5W(AM) @13.8VDC | 1.5W @battery
• Stray Suppression: 1.8 - 29.6MHz: ≥50dB | 50 - 54MHz: ≥60dB
• Sideband Suppression: ≥50dB
• Microphone Impedance: 200~10kΩ (600Ω in general)
  
  

Receiver:

• Circuit Type: ZIF
  
• Sideband Suppression: ≥50dB
• MDS: -138dB
  
  

Antenna Tuner:

• VSWR: 1:5.0
• Antenna tuner initial tuning time: ≤15s
• Antenna tuner tuning read time: ≤0.2s

What’s Included:

• 1 x Xiegu X6100 Transceiver
• 1 x USB Type-C Data Cable
• 1 x Multi-function Speaker Mic
• 1 x Power Adapter
• 1 x Charging Cable
• 1 x User Manual

Preliminary Features

• High resolution 1024*600 7-inch color touch LCD screen
• Spectrum and waterfall display with up to 192 kHz span
• Two built in sound cards
  1. 24-bit @192 ksps
  2. 3-32 bits @8-48 ksps
• DVR, Digital Voice Recorder
• Send/Receive CW and data modes (require USB keyboard)
• Adds RF Gain control to G90
• Power output control
• Adds FM Mode to G90
• Controls ATU
• Adds RX and TX EQ
• User definable controls
• I/Q and IF inputs
• Connect USB disk/SD card
• Wifi and Bluetooth support

Features

• 200k bandwidth spectrum display and waterfall display

• 1024*600 7-inch color touch LCD screen

• Digital mode decoding capabilities

• Automatic voice call and preset message storage & sending

• Supports mouse & keyboard operating

• Dual-core eMMc application processor

• Built-in PSK, RTTY, CW digital mode

• RX & TX Multi-band Equalizers

• Easy two-wire connection to G90

• Fast frequency change & band selection

• Three user-programmable buttons

• Power design for future expansion
　

Specifications

Applicable model: X5105, G90
Operating temperature scope: 0°C ~ +50°C
Frequency stability: ±1.5ppm in the 10~60min after startup
@25°C: 1ppm/hour
Supply voltage: 10.5~16.5VDC, negative electrode grounding
Current consumption: 600mA @ Max
Display screen resolution: 1024*600
Touch screen type: Capacitive
Spectral sensitivity: -120dBm ± 3dB
Audio output: 0.5W (8Ω, ≤10%THD)
Earphone output impedance: 16~32Ω
Size: 230*130*45mm (excluding projection)
Weight: about 1.2kg / 2.65lb (only host)

Package Includes

1 x Xiegu GSOC controller
1 x Power Cable
1 x I/Q Cable for G90
1 x G90 Connection Cable

PDF XIEGU X6100 PRODUCT OPERATION MANUAL 

PDF XIEGU X6100 FIRMWARE UPDATE INSTRUCTIONS